Mitel 5602 - Manual (Page 21)

Call Handling
15
Call Pickup
To answer a call that is ringing at another station in your Pickup Group:
1. Dial the feature access code for Call Pickup-Dialed and then press YES.
2. Answer the call.
To answer a call that is ringing at a extension not in your Pickup Group:
1. Dial the feature access code for Call Pickup-Directed, followed by the number of the
ringing extension, and then press YES.
2. Dial the number of the ringing extension.
Do Not Disturb
To activate Do Not Disturb:
1. Dial the Do Not Disturb feature access code and then press YES.
2. When you hear a dial tone, press NO to hang up. Do Not Disturb is activated.
To deactivate Do Not Disturb:
1. Dial the Do Not Disturb-Cancel feature access code and then press YES.
2. When you hear a dial tone, press NO to hang up. Do Not Disturb is deactivated
Paging
Direct Paging allows you to page another telephone over its built-in speaker. Group Paging
pages two or more telephones at the same time. Incoming pages are not supported.
To initiate a direct page:
1. Dial the feature access code for Direct Page, followed by the extension number you want
to page, and then press YES.
2. Wait for ringback and announce the page.
Music on Hold
Music on Hold is supplied by the ICP. See your system administrator.
Mobile Extension
Mitel Mobile Extension is a software solution that enables you to twin your desk phone with an
external PSTN-connected phone (your cell phone, for example). Calls arriving at the desk phone
ring the cell phone simultaneously, until one or the other is answered, or if unanswered, are
forwarded to voice mail. You can use the 5602 wireless handset as a destination (twinned)
device for your desk phone. For information about using your handset for Mobile Extension,