Mitel 5602 - Manual (Page 20)

5602 Wireless Handset User Guide
14
Device-based
Conference is not supported in device-based mode.
Call Park
System-based
The Call Park feature allows you to place a call in a special hold state.You can then retrieve
the call from any extension in the system.
To park an active call:
1. Press the R/Message key to place the call on hold.
2. Dial the Call Park feature access code immediately followed by the directory number on
which to park the call and then press YES.
3. Inform the called party of the waiting call.
To retrieve a parked call:
1. Press YES to go off hook.
2. Dial the Call Park - Retrieve feature access code immediately followed by the directory
number on which the call is parked, and then press YES.
Device-based
Call Park is not supported in device-based mode.
Call Forward
To set Call Forwarding:
1. Press YES to go offhook.
2. Enter the feature access code for the Call Forwarding mode you want to use, followed
immediately by the extension number to which you want to forward. (For example, if *62*
is your FAC for Call Fwd - Busy, and you want to forward calls to extension 1234, then
press *62*1234.)
3. Press YES.
To cancel Call Forwarding:
1. Enter the feature access code for Call Forwarding - Cancel and then press YES.
2. When you hear a dial tone, press NO to hang up. Forwarding is cancelled.