References – Maxon Telecom MODMAX MM-6280IND User Manual
Page 9

HSDPA Standard At Commands Page 9 of 61 Version 1.2
Term
Description
MSC
Mobile Switching Centre
MT
Mobile-Terminated where the SMS or the call is terminated [received] at the
Mobile Station.
MT2
Mobile Termination 2An MT2 provides a non-ISDN (Rm) user interface, e.g.,
CCITT V series or CCITT X series. Same at DCE. Refers to the MM-6280IND
modem.
NVM
Non Volatile Memory. User changeable and is written at time of change or
entry to a separate section of memory unaffected by power cycles. The setting
value is available in all profiles.
PCCA
Portable Computer and Communications Association
Rm
Hardwire Interface between MT2 and TE2.
SMS Short
text
Message
Service.
TE2
Terminal Equipment 2. A TE2 is a data terminal device that has a non-ISDN
user-network interface, e.g., CCITT V series or CCITT X series. Same as DTE.
Products which can issue AT command set and handle the response through
UART or RS-232 signalling ports of the MM-6280IND. The popular examples
of MT2 are PC’s, PDA and embedded systems i.e. Data Logger, PLC etc.
UART
Universal Asynchronous Receiver-Transmitter, the UART is a microchip
component that handles asynchronous serial communication. Every computer
contains a UART to manage the serial ports, and some internal modems such
as MM-6280IND have their own UART. UART 1(RS232 port) UART 2 (On
serial for diagnostics)
UE User
Equipment
UI User
Interface.
UICC
Universal Integrated Circuit Card
Um
Over-air interface between the MT2 and the BS.
USIM
Universal Subscriber Identity Module
1.3. References
The following standards are referenced in this text.
3GPP TS 22.002
3rd Generation Partnership Project; Bearer Services (BS) supported by a GSM Public Land Mobile
Network (PLMN)
3GPP TS 22.003
3rd Generation Partnership Project; Teleservices supported by a GSM Public Land Mobile Network
(PLMN).