3g quality of service profile (requested) +cgeqreq – Maxon Telecom MODMAX MM-6280IND User Manual
Page 46
HSDPA Standard At Commands Page 46 of 61 Version 1.2
+CGQMIN=?
+CGQMIN:
of supported
(list of supported
[
supported
of supported
Value
: a numeric parameter which specifies a particular PDP context definition (see the
+CGDCONT and +CGDSCONT commands).
The following parameters are defined in -3GPP TS 23.107 [46]:
: a numeric parameter which specifies the precedence class
: a numeric parameter which specifies the delay class
: a numeric parameter which specifies the reliability class
: a numeric parameter which specifies the peak throughput class
: a numeric parameter which specifies the mean throughput class
If a value is omitted for a particular class then this class is not checked
1.32.6.
3G Quality of Service Profile (Requested) +CGEQREQ
This command allows the TE to specify a UMTS Quality of Service Profile that is used when the
MT sends an Activate PDP Context Request message to the network.
The set command specifies a profile for the context identified by the (local) context identification
parameter,
activation or MS-initiated modification of the related context. Since this is the same parameter
that is used in the +CGDCONT and +CGDSCONT commands, the +CGEQREQ command is
effectively an extension to these commands. The QoS profile consists of a number of parameters,
each of which may be set to a separate value.
A special form of the set command, +CGEQREQ=
number
The read command returns the current settings for each defined context.
The test command returns values supported as a compound value. If the MT supports several
PDP types, the parameter value ranges for each PDP type are returned on a separate line..
Table 33.
+ CGEQREQ parameter command syntax
Command
Possible response(s)
+CGEQREQ=[
[,
[,
[,
[,
[,
[,
[,
OK
ERROR