Maxon Telecom MODMAX MM-6280IND User Manual
Page 51
HSDPA Standard At Commands Page 51 of 61 Version 1.2
SDU size>s) ,(list of supported ratio>s) ,(list of supported ratio>s) ,(list of supported erroneous SDUs>s) ,(list of supported delay>s) ,(list of supported priority>s) […]] Value : a numeric parameter which specifies a particular PDP context definition (see +CGDCONT and +CGDSCONT The following parameters are defined in 3GPP TS 23.107 a numeric parameter that indicates the type of application for which the UMTS bearer service is optimised. Other values are reserved. a numeric parameter that indicates the maximum number of kbits/s delivered to UMTS (up-link a numeric parameter that indicates the maximum number of kbits/s delivered by UMTS (down-link a numeric parameter that indicates the guaranteed number of kbits/s delivered to UMTS a numeric parameter that indicates the guaranteed number of kbits/s delivered by UMTS a numeric parameter that indicates whether the UMTS bearer shall provide in-sequence SDU
commands).
[46] -
0 - conversational
1 - streaming
2 - interactive
3 - background
traffic) at a SAP. As an example a bitrate of 32kbit/s would be
specified as '32' (e.g. AT+CGEQMIN=…,32, …) (refer TS
24.008 [8] subclause 10.5.6.5).
traffic) at a SAP. As an example a bitrate of 32kbit/s would be
specified as '32' (e.g. AT+CGEQMIN=…,32, …) (refer TS
24.008 [8] subclause 10.5.6.5).
(up-link traffic) at a SAP (provided that there is data to deliver).
As an example a bitrate of 32kbit/s would be specified as '32'
(e.g. AT+CGEQMIN=…,32, …) (refer TS 24.008 [8] subclause
10.5.6.5).
(down-link traffic) at a SAP (provided that there is data to
deliver). As an example a bitrate of 32kbit/s would be specified
as '32' (e.g. AT+CGEQMIN=…,32, …) (refer TS 24.008 [8]
subclause 10.5.6.5).
delivery or not.
0 - no
1 - yes