Mitel 5304 - Manual (Page 58)

Call Features
Page 44 Mitel ® 5304 IP Phone User Guide – Issue 2, June 2010
Changing the DND Settings
See “Using Do-Not-Disturb (DND)” on page 49 for more information about using DND.
To turn on DND using Remote Programming:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
page 40 for details on setting up a
Station password for your extension.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To turn off DND using Remote Programming:
Follow steps 1 - 4 above, dial 371, and then hang up.
Changing the Manual Call Forwarding Settings
See “Manual Call Forwarding” on page 33 for more information about Manual Call Forwarding.
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
page 40 for details on setting up a
Station password for your extension.
5. Dial one of the following Call Forwarding feature codes:
• 355 (All)
• 356 (No answer)
• 357 (Busy)
• 358 (No Answer/Busy)
6. Do one of the following to specify a forwarding number:
• Enter an extension number.
• Dial the Outgoing Call access code (8 is the default code), and then dial the
number.
To turn off Call Forwarding using Remote Programming:
Follow steps 1 - 4 above, dial 355, and then hang up.