Mitel 5304 - Manual (Page 38)

Answering and Placing Calls
Page 24 Mitel ® 5304 IP Phone User Guide – Issue 2, June 2010
Dialing Station Speed-Dial Numbers
If you have assigned a speed dial entry to one of your programmable buttons, you can press
the button for one touch dialing (see
page 25 ). If you do not have a speed-dial button, you can
access the speed-dial feature using the 382 feature code.
To dial a Station Speed-Dial number:
Lift the handset and do one of the following:
• Press the button you have assigned to the speed-dial number.
• Dial 382, and then enter the Station Speed-Dial location number (0 to 9).
• Dial 382, press (Up) or (Down) to scroll through the speed-dial locations,
and then press # to select the location.
The system dials the number.
Deleting Station Speed-Dial Entries
If you no longer need a speed-dial entry, you can delete it.
To delete a Station Speed-Dial entry:
1. Lift the handset and dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears.
2. Do one of the following:
• Enter the speed-dial location (0 to 9).
• Press (Up) or (Down) to scroll through the speed-dial locations.
3. Press # to select the location.
4. Hold down the Hold button until the name is erased, and then press # to continue.
5. Hold down the Hold button until the number is erased, and then press #. STN SPD BIN
# <number> UPDATED appears.