Philips Magnavox 27MDTR10S - Manual (Page 17)

Rear Panel 17
ANT. L
AUDIO OUT
R
COAXIAL
ANT. Jack
(Antenna In)
Connect an antenna or Cable TV signal here. This brings TV
channels to the TV/VCR/DVD. If you do not connect an antenna
or Cable TV signal to the TV/VCR/DVD (or connect to a Cable
Box/Satellite Receiver through this jack), you will not receive
any TV channels. Details are on page 8.
Power Cord
Connect to a standard AC outlet (120V/60Hz).
COAXIAL Jack
(Digital Audio Out) (orange)
Connect this jack to a Digital Stereo using a digital audio coaxial
cable (not supplied). Use this connection if the Stereo has Dolby
Digital compatibility and has a Digital Coaxial Audio In jack. You
may also use this connection when connecting the
TV/VCR/DVD to a Mini-Disc or Digital Audio Tape deck. Details
are on page 10.
AUDIO OUT L/R jacks
(Audio Out, left and right, white and red)
Connect these jacks to an analog Stereo. The Stereo will have
right and left Audio In jacks. This means it receives and sends
sound through two channels, the right and the left. These jacks
are usually red and white on the Stereo.
Details are on page 10.