Marker setting, Repeat playback, Special playback – Philips Magnavox ZV427MG9 User Manual
Page 54: 54 en en
54
EN
EN
SPECIAL PLAYBACK
This feature allows you to assign a specific point on a disc
to be called back later.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2) Use [
{ /
{ B] to select
to display the marker list.
e.g.) DVD-video
1/ 5
1/ 5
DVD
0:01:00 / 1:23:45
Video
3) Use [
K / L] to select a desired marker number.
When it reaches the desired point, press [OK].
1/ 5
1/ 5
DVD
---
---
---
---
---
---
1
2
3
4
5
6
0:01:00 / 1:23:45
Video
The title (track) number and the time will be displayed.
4) To return to the marker later:
Use [
K / L] to select the desired marker number,
then press [OK].
Marker Setting
Note
• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
– Turning the unit to standby / off
– Record on a recordable disc
• You can mark up to 6 points.
• Marker setting is not available when you play back
the video CD with PBC function.
Available repeat function may vary depending the discs.
1) During playback press [DISPLAY] to bring up the
display menu, then proceed to step 2), or press
[REPEAT] then proceed to step 3).
If the display menu is already shown, skip to step 2.
2) Use [
{ /
{ B] to select
to display the selection
menu.
1/ 5
1/ 5
DVD
0:01:00 / 1:23:45
Video
K / L] to select a desired repeat type, then
press [OK].
The selected repeat playback will start.
e.g.) DVD-video
OFF
Title
Chapter
A – B
e.g.) audio CD, video CD
OFF
Track
All
A – B
e.g.) MP3 / JPEG files
OFF
Track
All
Group
Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [
K / L] to select “A-B”, then press [OK].
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
Note
• Point B for the repeat A-B playback should be set
within the same title or track as point A.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
• You cannot select “Group” during the random playback.
• Repeat playback is not available when you play back
the video CD with PBC function.
• During the A-B repeat, if you reaches the point A with any
reverse playback, the reverse playback will be canceled
and the A-B repeat playback resumes from point A.