Garmin GPSMAP 296 - Manual (Page 43)

Additional Map Data
You can view the data that is currently loaded on your GPSMAP 296
unit and data card.
To review or change data card information:
1. Access the Map Page, and press MENU.
2. From the options menu, highlight Map Information, and
press ENTER.
Map Card Information Page
Map Family
highlighted.
Press ENTER
to view the
individual maps
in the family.
3. The first page shows the Map Families that are stored on the
data card and whether they are shown on the Map Page.
To change the setting for a Map Family, highlight the box next
to the Map Family name, and press ENTER to select (check
mark) or deselect (no check mark) the Show setting.
4. To view the list of maps within a Map Family, highlight the
name of the Map Family, and press ENTER.
Individual Map Information Page
Showing the individual maps that are in the selected Map Family
5. To view detailed information about an individual map,
highlight the Map Name, and press ENTER. Highlight OK,
and press ENTER to exit the map information page.
6. To select/deselect individual maps, highlight the box next to a
map, and press ENTER to check/uncheck the Show box. Or,
press MENU, and select one of the options (Show All, Hide
All, or Show Defaults), and press ENTER.
7. Press QUIT to exit the Map Information Page.
GPSMAP 296 Pilot’s Guide 35
A
VIATION
M
ODE
P
AGES
> M
AP
P
AGE