Garmin GPSMAP 296 User Manual
Page 20
Entering a New Location
From the GPS options menu you can enter a New Location and
New Altitude to simulate from.
To enter a New Location using the map:
1. Press
MENU twice and highlight GPS from the vertical menu.
2. Press
MENU to open the options menu.
3. Highlight
New Location, and press ENTER.
4. Highlight
Use Map, and press ENTER.
5. Use the
ROCKER to move the panning arrow to the location
on the map you want, and press
ENTER.
You can also select a New Location by entering an airport identifier
(code). Select Use Identifier from the GPS tab options menu. Enter
the airport code using the ROCKER. Refer to
for complete
instructions about entering airport identifiers and user waypoints.
To adjust the simulated speed, heading, and altitude
from the Panel, Pointer, or Highway pages:
1. Press up on the
ROCKER increase the speed in
10 knot/kph/mph increments. Press down on the
ROCKER to
decrease the speed in the same increments.
2. Press left or right on the
ROCKER to change heading.
3. Press the
IN and OUT Zoom keys to increase or decrease
altitude (Aviation Mode only).
12
GPSMAP 296 Pilot’s Guide
G
ETTING
S
TARTED
>
S
IMULATOR
M
ODE