Marking a waypoint – Garmin GPSMAP 296 User Manual
Page 33
Marking a Waypoint
Waypoints are locations or landmarks you record and store in your
GPSMAP 296. Press the
ENTER/MARK to capture your present
location to create a new waypoint. You must have a valid 2D or 3D
satellite fix to mark your location. Press
MENU twice and open the
GPS tab to view your satellite receiver status.
For more information about editing waypoints, see the
section beginning on
page 73
To mark your present location:
1. Press and hold
ENTER/MARK until the Mark Waypoint Page
appears.
2. To accept the waypoint with the default name (“Waypoint”),
use the
ROCKER to highlight OK, and press ENTER.
To mark a selected location as a waypoint:
1. Press
PAGE to open the Map Page.
2. Use the
ROCKER to move the arrow to the location you want
to save as a waypoint.
3. Quickly press and release
ENTER/MARK to open the
Information Page for the map item.
Saving the selected item as a waypoint
4. To save the waypoint, use the
ROCKER to highlight Save,
and press
ENTER.
5. To accept the waypoint with the default name, highlight
OK,
and press
ENTER.
GPSMAP 296 Pilot’s Guide
25
B
ASIC
O
PERATION
IN
A
VIATION
M
ODE
>
M
ARKING
A
W
AYPOINT