GarrettCom TF14 - Manual (Page 48)

Magnum “14” 10Mb Media Converters Installation and User Guide (04/01)
41
w w w G arrettC om com . .
impaired during installation. (About 90% of network downtime can be
attributed to wiring and connector problems.)
3. Make sure that an AC power cord is properly attached to each Magnum
TF14/TB14 10 Mb/s Media Converters unit. Be certain that each AC power
cord is plugged into a functioning electrical outlet. Use the PWR LEDs to
verify each unit is receiving power.
4. If the problem is isolated to a network device other than the Magnum
TF14/TB14 10 Mb/s Media Converters product, it is recommended that the
problem device is replaced with a known good device. Verify whether or not
the problem is corrected. If not, go to Step 5 below. If the problem is
corrected, the Magnum TF14/TB14 10 Mb/s Media Converters and its
associated cables are functioning properly.
5. If the problem continues after completing Step 4 above, contact your supplier
of the Magnum TF14/TB14 10 Mb/s Media Converters unit or if unknown,
contact GarrettCom, Inc.by fax, phone or email ([email protected]) for
assistance.