Gateway PLU-300 - Manual (Page 8)

4
Chapter 1: Setting Up Your Powerline Adapter
www.gateway.com
2 Click Install the software . The InstallShield Wizard
starts.
- OR -
If you are installing the Gateway PLU-300 Ethernet
adapter and the wizard does not start automatically,
click
Start , Run , type d:\plu-300\setup.exe in the Run
box, then click OK . The InstallShield Wizard starts.
- OR -
If you are installing the Gateway PLE-310 Ethernet
adapter and the wizard does not start automatically,
click
Start , Run , type d:\ple-310\setup.exe in the Run
box, then click OK . The InstallShield Wizard starts.
3 Click Next , then follow the on-screen instructions.
During the installation:
■ If installing the software on Windows XP and a
message tells you that the driver has not passed
Windows Logo testing, click
Continue Anyway . The
device driver files are copied to the hard drive.
■ If installing the software on Windows 2000 and a
a message tells you that no digital signature is
found, click
Yes . The device driver files are copied
to the hard drive.