Gateway PLU-300 - Manual (Page 59)

55
About the Powerline configuration utility
www.gateway.com
To remotely set the network password on other
computers:
1 Click Start , Programs , Gateway Powerline Adapter , then click
PLU-300 or PLE-310 . The Gateway Powerline Adapter
Configuration Utility starts and the utility scans the
Powerline network for Powerline devices that are
connected to the network.
2 Click the Advanced tab.
3 Type the private network password into the Network
Password box.
4 Locate the different passwords (IDs) for the other devices
you want to manage.
5 Type one of the passwords into the Add Password box and
click Add . The password appears in the Remote Passwords
box.
6 Repeat Step 5 for each password you want to add.
7 Click Set All to apply the private network password to all
devices listed in the Remote Passwords box.