Gateway PLU-300 - Manual (Page 27)

23
Step 3: Configuring the TCP/IP protocol
www.gateway.com
4 Click Properties . The Internet Protocol (TCP/IP) Properties
dialog box opens.
5 Click Obtain an IP address automatically.
6 Click OK to close the Internet Protocol (TCP/IP)
Properties dialog box.
7 Click OK to close the Local Area Connection Properties
dialog box.
8 Click X to close the Network and Dial-up Connections
window.
9 Repeat this procedure for every computer on your
network.
10 After you set up the IP addresses on all your
computers, go to “Turning the powerline adapter off”
on page 26.