Gateway PLU-300 - Manual (Page 26)

22
Chapter 1: Setting Up Your Powerline Adapter
www.gateway.com
Setting up a DHCP IP address for Windows 2000
To set up a DHCP IP address for Windows 2000:
1 Click Start , Settings , then click Network and Dial-up
Connections . The Network and Dial-up Connections
window opens. This window has an icon for each
networking connection available on your computer.
For example, if you have both wired and wireless
Ethernet hardware installed on your computer, there
will be at least two icons, one for your wired Ethernet
hardware and one for your wireless Ethernet
hardware.
2 Right-click the Local Area Connection icon for the wired
Ethernet hardware, then click Properties . The Local
Area Connection Properties dialog box opens.
3 Click to select the Internet Protocol (TCP/IP) check box in
the Components checked are used by this connection list. If
you do not see TCP/IP, drag the scroll bar to see more
choices.