Garmin HM210DP/DI - Manual (Page 95)

Configuring Firewall Settings
EN/LZT 108 6492 R2 - October 2003 87
Ignore: (Default) The rule will be applied to
packets whether or not they contain fragments,
assuming that they match the other criteria.
IP Option Pkt: Determines whether the rule should apply to IP
packets that have options specified in their
packet headers. You can choose from the
following options:
Yes: The rule will be applied only to packets that
contain header options.
No: The rule will be applied only to packets that
do not contain header options.
Ignore: (Default) The rule will be applied to
packets whether or not they contain header
options, assuming that they match the other
criteria.
Packet Size: Specifies that the IP Filter rule will take affect
only on packets whose size in bytes matches this
criteria. (lt=less than, gt=greater than, lteq=less
than or equal to, etc).
TOD Rule Status: The Time of Day Rule Status determines how the
Start Time/End Time settings are used.
Enable: (Default) The rule is in effect for the
specified time period.
Disable: The rule is not in effect for the specified
time period, but is effective at all other times.
3. When you are done selecting criteria, ensure that the Enable radio
button is selected and then click the Submit button.
If the security level of the rule matches the globally configured
setting, a green ball in the “Status” column for that rule, indicating
that the rule is now in effect. A red ball will display when the rule is
disabled or if its security level is different than the globally
configured level.
4. Ensure that the Security Level and Private/Public/DMZ Default
Action settings on the IP Filter configuration page are configured
as needed, then click the Submit button.
5. Select Admin > Commit & Reboot and click the Commit button to
save your changes to permanent storage.