Garmin HM210DP/DI - Manual (Page 43)

Basic Configuration
EN/LZT 108 6492 R2 - October 2003 35
4. After entering the fields above, click the Submit button and when
the confirmation page appears, click Close.
5. You will return to the IpoA Configuration table and see the newly
added IPoA entry:
6. Click Map in the “Action” column. The IPoA Interface – Map page
appears:
7. Select an ATM VC you have created earlier from the “Lower
Interface:” dropdown list and then click Add. Click Close to exit the
confirmation page.
8. Select Admin > Commit & Reboot and click the Commit button to
store your changes to permanent memory.
5.4.2 Checking Your Connection Status
Select Home > System Mode. The WAN Interface item should display the
interface you created to communicate with your ISP. A green ball in the
Status field indicates a successful connection: