Garmin HM210DP/DI - Manual (Page 108)

Administration Tasks
100 EN/LZT 108 6492 R2 - October 2003
12.6 Viewing System Alarms
You can use the Configuration Manager to view information about alarms
that occur in the system. Alarms, also called traps, are caused by a variety
of system events, including connection attempts, resets, and configuration
changes.
Although you will not typically need to view this information, it may be
helpful in working with your ISP to troubleshoot problems you encounter
with the device. (Despite their name, not all alarms indicate problems in the
functioning of the system).
To display the Alarm page, select Admin > Alarm:
Each row in the table displays the time and date when an alarm occurred,
the type of alarm and a brief statement indicating its cause.
You can select a recurring time interval in the “Refresh Rate” dropdown list
after which the page will be redisplayed with new data.