GIGABYTE 7VT600-RZ - Manual (Page 29)

BIOS Setup - 29 -
English
F ACPI Suspend Type
8 S1(POS) Set suspend type to Power On Suspend under ACPI OS(Power On
Suspend). (Default value)
8 S3(STR) Set suspend type to Suspend To RAM under ACPI OS (Suspend To RAM).
F USB Device Wakeup From S3(When ACPI Suspend Type is set [S3(STR)])
USB device wakeup From S3 can be set when ACPI standby state set to S3/STR.
8
Enabled USB Device can wakeup system from S3.
8 Disabled USB Device can’t wakeup system from S3. (Default value)
F Power LED in S1 state
8 Blinking In standby m ode(S1), power LED will blink. (Default value)
8 Dual/Off In standby m ode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
F Soft-off by PWRBTN
8 Instant-off Press power button then Power off instantly. (Default value)
8 Delay 4 Sec. Press power button 4 sec to Power off. Enter suspend if button is pressed
less than 4 sec.
F AC Back Function
8 Memory System power on depends on the status before AC lost.
8 Soft-Off Always in Off state when AC back. (Default value)
8 Full-On Always power on the system when AC back.
F Keyboard Power On
This feature allows you to set the m ethod for powering-on the system.
The option "Password" allows you to set up to 8 alphanum eric characters to power-on the system.
The option "Keyboard 98" allows you to use the standard keyboard 98 to power on the system.
8
Password Enter from 1 to 8 characters to set the Keyboard Power On Password.
8 Disabled Disabled this function. (Default value)
8 Keyboard 98 If your keyboard have "POWER Key" button, you can press the key to
power on your system .
F Mouse Power On
8 Disabled Can't Power on system by Mouse Event. (Default value)
8 Enabled Can Power on system by M ouse Event.
F PME Event Wake up
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled state.
This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
8
Disabled Disabled PM E Event Wake up function.
8 Enabled Enabled PME Event Wake up function. (Default Value)