Gateway 6400 User Manual

Page 12

Text mode
Original mode

Front panel

Front panel LEDs indicate the following when lit:

■

Power On LED (steady green indicates power is on and blinking green
indicates system is in sleep mode).

■

HDD Activity LED (green) indicates when hard drive is active.

■

NIC Activity LED (green) indicates LAN activity.

■

System Fault LED (yellow) indicates ECC (Error Checking and
Correcting) memory system fault (steady indicates an uncorrectable ECC
fault and blinking indicates a correctable ECC fault).

System Fault LED reset switch is used to clear system fault LED.

Power button turns the computer on and off. It also enables sleep-mode in
some operating systems.

Reset button restarts the system when it becomes non-responsive.

05032.book Page 3 Monday, July 10, 2000 11:43 AM