Programming the hotkey, Programming the hotkey” on – Gateway Laptop User Manual
Page 37
www.gateway.com
29
Programming the hotkey
By default, the hotkey, located above the keyboard (see
), opens up the Control Panel. You
can select a different program for the button to open.
To program the hotkey:
1
Click Start,
All Programs
, Gateway, then click Gateway
Hotkey Setup. The Keyboard Hotkey Setup dialog box
opens.
2
Click to uncheck the Default check box.
3
Click Browse. The Open dialog box opens.
4
Browse to the program you want to have the hotkey
open, then click Open.
5
Click Close.
Tip
To have the hotkey open the Control Panel, click to select
Default.