Gateway 9210 - Manual (Page 16)

11 www.gateway.com
Starting your server
Before you start your server for the first time:
■ Make sure that the server and monitor are plugged into a power outlet or surge
protector and that the surge protector (if you are using one) is turned on.
■ Make sure that all cables are connected securely to the correct ports and jacks on the
back of the server.
To start the server:
1
Turn on any peripheral devices connected to the server.
2
Press the power button.
Warning When you connect peripheral devices to the server, make
sure that your server and devices are turned off and the
power cords are unplugged.
When the power
indicator is... It means...
Green (steady on) The server is turned on.
Orange The server is in Standby mode.
Off The server is turned off.
Power
button