Go-Video VR2945 - Manual (Page 35)

• Some options cannot be reset, including Parental Controls,
Password, and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the
country, language, channel, and clock settings again.
If you wish, you can reset the DVD Recorder+VCR to its original
factory settings.
1
Press [SETUP].
2
Use [œ/√] to select ‘Restore Defaults‘.
3
Press [ENTER].
4
The Initialize menu will appear. Use the […/†] buttons to
select ‘Yes‘ and press [ENTER].
System Information
34
Initial Setup
System Information helps service personnel identify key firmware information
about your DVD Recorder+VCR in case service is required.
System Info
Chipset EP Set 1.0
Main Build DR3-1.0.2
Micom Software 0.0.0
DVD Navigation 1.0.0
Instructions
Enter-Confirm Setup-Exit
Move …†
Restore Defaults
Restore Defaults
If you select this function all
settings will be removed and
the product will be set into
initial (factory) mode.
Instructions
Enter-Confirm Setup-Exit
Move …†
Are you sure you want to restore
default settings?
Yes
No