Go-Video VR2945 - Manual (Page 24)

SETUP
23
Initial Setup
Auto Channel Search
The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving
up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and
CATV channels 1-125.
Preparation:
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV
system, as shown in ‘Connecting Antenna/Cable‘ on page 15.
1
Follow steps 1-2 as shown under Tuning Band.
2
While ‘Installation‘ is selected, press […/†] to select ‘Auto Channel
Search‘.
3
Press [ENTER] to begin the channel search.
The tuner will automatically search for all available channels in your area
and place them in the tuner’s memory.
• After Auto Channel Search is complete, follow the instructions above to make
sure that Tuning Band is set correctly (TV or CATV).
Add/Remove Channels
This feature allows you to manually add or delete channels from your
channel list.
1
Follow steps 1-2 as shown under Tuning Band.
2
Use […/†] to select ‘Add/Remove Channels‘.
3
Press [ENTER]. The Channel Edit menu appears.
4
Use […/†] to select a channel then toggle the add/delete selection
by pressing [ENTER].
5
Press [SETUP] to exit the Channel Edit menu.
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
Modulator Out
CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move …†
Installation
Searching for available TV stations:
5 channels found
Please wait...
Instructions
Setup-Exit
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
Modulator Out
CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move …†
Channel 0 0 1
Enter-Add/Remove Setup-Exit
Change Channel …†
…
†