Go-Video VR2945 - Manual (Page 25)

Set Clock
1
Follow steps 1-2 as shown under Tuning Band.
2
Use […/†] to select ‘Set Clock‘.
3
Press [ENTER]. The Set Clock menu appears.
4
Enter the date and time.
œ /√ (left/right): Moves the cursor to the previous or next column.
…/† (up/down): Changes the setting at the current cursor position.
5
Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup
menu.
24
Initial Setup
Modulator Out
This feature allows you to set the RF Output channel to your TV
(you only need to set this if you are using the RF Out connection
to your TV).
1
Follow steps 1-2 as shown under Tuning Band.
2
Use […/†] to select ‘Modulator Out‘.
3
Press [ENTER] to move to the second level.
4
Use […/†] to set the Modulator Out channel to ‘CH3’ or
‘CH4’.
5
Press [ENTER] to confirm.
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
Modulator Out
CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move …†
Select Output
Channel
CH3
CH4
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
Modulator Out
CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move …†
Set Clock
Please set the clock:
Time : 12 : 00 AM
Date : Jan / 01 / 2005 (SAT)
Instructions
Enter-Confirm Setup-Exit Move …†
…
†