Go-Video VR2945 - Manual (Page 23)

The DVD Recorder+VCR Setup menu includes six categories, including: Installation, Recording Options,
Languages, Preferences, System Info, and Restore Defaults. Press [SETUP] and [œ/√] on the remote control to
view the first and second levels of the Setup menu.
Setup Menu Overview
22
1
Press [SETUP].
The Setup menu appears.
2
Use [œ/√] to select the desired category.
3
While the desired category is selected, press […/†] to move to the second level.
4
Press [ENTER] to move to the third level.
5
Use […/†] to select the desired setting, then press [ENTER] to confirm your selection.
Some items require additional steps. Press [SETUP] at any time to return to the previous menu.
6
Press [SETUP] to exit the Setup menu.
Menu Navigation
Tuning Band
1
Press [SETUP].
The Setup menu appears.
2
Use [œ/√] to select ‘Installation‘.
3
While ‘Installation‘ is selected, press [†] to select
‘TV/CATV‘.
4
Press [ENTER] to move to the second level.
5
Use […/†] to select TV or CATV, then press [ENTER].
TV: If you are using a standard antenna to receive channels.
CATV: If you are using basic cable to receive channels.
INSTALLATION Settings
Initial Setup Initial Setup
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
Modulator Out
CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move …†
Select The TV
Standard
TV
CATV
• If you are receiving channels from a cable box or satellite receiver connected to the LINE1 or LINE2 inputs, there is
no need to set Tuning Band or search for channels. Set the DVD Recorder+VCR to its LINE1 or LINE 2 input and
select the desired channel on your cable box or satellite receiver.