Installing the support rails, To install the support rails in the cabinet – Gateway 820 LTO User Manual
Page 24
20
Chapter 3: Setting Up the Autoloader
www.gateway.com
Installing the support rails
To install the support rails in the cabinet:
1
Remove the two support rails from the kit and note how they will be
positioned in the cabinet. When the rails are installed, the shelf flanges
will face inward to support the autoloader.
2
From the front of the cabinet, position one of the rails on the appropriate
side. Slide the rail pieces apart to match the depth of your cabinet. Position
the front flange so it is on the outside of the strip of mounting holes in
the cabinet.