Operation safety, Notice, Basic controls – Grizzly G0604 User Manual

Page 23

G0604 6" X 56" Jointer

-21-

Damage to your eyes, lungs, and ears could

result from using this machine without

proper protective gear. Always wear safety

glasses, a respirator, and hearing protection

when operating this machine.

Loose hair and cloth-

ing could get caught in

machinery and cause seri-

ous personal injury. Keep

loose clothing and long

hair away from moving

machinery.

Operation Safety

SECTION 4: OPERATIONS

NOTICE

If you have never used this type of machine

or equipment before, WE STRONGLY REC-

OMMEND that you read books, trade maga-

zines, or get formal training before begin-

ning any projects. Regardless of the con-

tent in this section, Grizzly Industrial will

not be held liable for accidents caused by

lack of training.

Basic Controls

This section covers the basic controls used during
routine operations.

START & STOP Buttons (Figure 21)

Figure 21. START/STOP button locations.

Table Movement: To move the infeed table,
loosen the table lock (

Figure 22), move the table

with the table lever in the preset range, then
tighten the table lock. The outfeed table is preset
with no range of movement allowed, so if it gets
accidentally unlocked it will not move. To adjust
the preset range of movement, refer to

SECTION

7: SERVICE about setting table heights.

Figure 22. Table control locations.

Table
Lever

Table

Locks

STOP

Button

START

Button

Lock the mobile base wheel before operat-

ing the jointer! Operating the jointer with the

wheel unlocked may cause loss of control,

resulting in serious personal injury.