Grizzly G0440 - Manual (Page 23)

Model g0443 (Mfg. since 11/09)
-21-
19. insert the rubber seal over the top lip of the
collection drum rim. pay special attention
to the direction of the seal, as shown in the
figure 26.
Tip: To keep the seal in place, you can use
an adhesive applied to the rubber seal at
approximately 1" intervals.
figure 26. installing canister seal.
seal
drum
rim
optional
adhesive
20. insert the larger of the plastic collection bags
into the collection drum, place the lid on the
collection drum and hook the latch over the
lid, as shown in
figure 27, then clamp it in
place.
figure 27. latch hooked over lid for clamping.
21. Move the collector drum under the dust col-
lector and connect it to the cyclone funnel
with the clear flexible hose and the two 9"
hose clamps, as shown in
figure 28.
figure 28. drum attached to cyclone funnel with
clear 9" hose.
22. Connect the vacuum hose to the cyclone fun-
nel and collection drum vacuum tubes with (2)
1
1 ⁄
4
" hose clamps, as shown in figure 29.
figure 29. Connecting the vacuum hose.