Grizzly G0440 - Manual (Page 22)

-20-
Model g0443 (Mfg. since 11/09)
16. attach the casters to the bottom of the lower
collection drum, as shown in figure 23, using
the (4) 3 ⁄
8
"-16 hex nuts, (8) 3 ⁄
8
" flat washers,
and (4) 3 ⁄
8
" lock washers included in the box
with the casters.
figure 23. Cut-away illustration of casters
attached to the lower collection drum.
figure 22. gray hose properly installed.
17. install the drum latches, as shown in figure
24, with the (6) #10-24 x 3 ⁄
8
" phillips head
screws and (6) #10-24 hex nuts included in
the box with the drum latches. Make sure the
hex nuts are on the outside of the drum so
that they will not snag the plastic collection
bag.
figure 24. installing drum latches on collector
drum.
18. place the collection drum vacuum ring
on the bottom of the collection drum (see
figure 25).
Note: During operation, this ring and the
vacuum connection to the cyclone funnel will
prevent the collection bag from collapsing.
figure 25. inserting collection drum vacuum
ring.
15. Connect the gray flexible hose from the out-
let port to the canister adapter and secure
it in place with the two 7" hose clamps, as
shown in
figure 22.