Grizzly G0440 - Manual (Page 21)

Model G0443 (Mfg. Since 11/09)
-19-
12. Attach the outlet port and filter L-braces to
the blower housing with the outlet gasket
between the outlet port and the housing, as
shown in
Figures 18–19, using (8) 5 ⁄
16
"-18 x
1" hex bolts, (16) 5 ⁄
16
" flat washers, and (8)
5 ⁄
16
"-18 hex nuts.
Note: One of the braces attaches directly to
the housing with the following hardware: (2)
5 ⁄
16
"-18 x 1" hex bolts, (4) 5 ⁄
16
" flat washers,
and (2) 5 ⁄
16
"-18 hex nuts.
13. Mount the filter to the L-braces with the brace
gaskets between them, as shown in Figure
20, using (4) 5 ⁄
16
"-18 x 3 ⁄
4
" hex bolts and (4)
5 ⁄
16
" fender washers.
Figure 20. Mounting filters to the braces.
Brace Gasket Here
Figure 18. Outlet port and filter L-braces
installed.
Figure 19. Model G0443 outlet port and filter
L-braces installed.
Outlet Gasket Here
14. Apply the 3 x 15mm foam tape to the edges
of the outlet port and the canister adapter, as
shown in
Figure 21.
Note: It may be necessary to reposition the can-
ister L-braces down one bolt hole or shorten the
length of the longer piece of flexible hose to acco-
modate the bend in the hose.
Figure 21. Foam tape applied to the outlet port
and canister adapter.
Foam
Tape
x 4