beautypg.com

User instructions, Arrangement of fuel bed components, Upgrading your fire – Stovax 8455 User Manual

Page 5: Cleaning the fire

background image

7. ARRANGEMENT OF FUEL BED

COMPONENTS

ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS

The fuel effect and side panels in this appliance are made from

Refractory Ceramic Fibre (RCF), a material which is commonly

used for this application.

Protective clothing is not required when handling these articles,

but we recommend you follow normal hygiene rules of not

smoking, eating or drinking in the work area and always wash your

hands before eating or drinking.

To ensure that the release of RCF fibres are kept to a minimum,

during installation and servicing a HEPA filtered vacuum is

recommended to remove any dust accumulated in and around the

appliance before and after working on it. When servicing the

appliance it is recommended that the replaced items are not

broken up, but are sealed within heavy duty polythene bags and

labelled as RCF waste.

RCF waste is classed as stable, non-reactive hazardous waste and

may be disposed of at a licensed landfill site.

Excessive exposure to these materials may cause temporary

irritation to eyes, skin and respiratory tract; wash hands thoroughly

after handling the material.

NOTE: CERAMIC PARTS ARE FRAGILE. ONLY USE THE SPECIAL

CERAMIC COALS SUPPLIED BY GAZCO - DO NOT USE REAL

COALS.

7.1 Position the flame baffle on the rear of the tray. See Diagram 3

arrow B.

7.2 Position the front coal, make sure it sits flat onto the burner

skin. See Diagram 3 arrow C.

3

AR2190

7.3 Place the coals following the appropriate Diagrams and

Instructions

5

USER INSTRUCTIONS

2

AR0416

5. UPGRADING YOUR FIRE

5.1 Your fire is fitted with a control valve that can easily be

upgraded to battery powered remote control. This upgrade

can be fitted by anyone capable of simple DIY jobs and

requires no special training. This upgrade can be obtained

through your local Gazco stockist.

5.2 STANDARD REMOTE CONTROL This remote control can

control the fire after the pilot has been lit. It can turn the main

burner on and regulate it from low through to high and back

again. It can turn the main burner off leaving the pilot burning

GAZCO PART NUMBER 8455.

5.3 IMPORTANT - there is a thermostatic version of the upgrade

but this is NOT SUITABLE for open flame fires like the VFC.

6. CLEANING THE FIRE

6.1 Remove the ceramic coals and place on a dry, clean

surface. Remove the front coal ceramic. Please handle with

care.

6.2 The ceramic parts should not require cleaning. Do not use a

vacuum cleaner or brush to clean these parts, any large pieces

of debris may be removed by hand.

6.3 Ensure any debris is removed from the burner ports.

6.4 Replace the ceramics by referring to Section 7.