Grizzly G1019 - Manual (Page 20)

-18- G1019 14'' Bandsaw
A 3 ⁄
8
" blade is included with the bandsaw and is
already installed on the machine. Refer to
Section 5: Adjustments for detail on blade ten-
sioning and blade tracking before starting the
machine. Refer to Section 6: Operations for
instructions on selecting and changing blades.
This concludes the assembly process. Please
DO NOT operate this saw until you have
reviewed the Safety Information and have read
the Adjustment and Operation sections.
Blades
Do not operate this bandsaw until you have
completed the adjustments noted in the
next section and have reviewed all safety
information. Serious personal injury may
result.
3. Square the assembly and tighten each cap
screw.
4. Slip the fence onto the fence rail. To lock the
fence in position, tighten the fence knob.
See Figure 22.
Figure 22. Fence in position.