Grizzly G1019 - Manual (Page 17)

G1019 14'' Bandsaw -15-
Stand Guards
1. Place the pulley and belt guard case over
the drive pulley and secure using the #10-
24 x
1 ⁄
2
'' pan head screws, lock washers, flat
washers and wing nuts supplied. See
Figure 16.
2. Insert the black plastic stand panels/covers
in place. See Figure 17.
Figure 16. Guard case in place.
Figure 17. Panel cover insertion.
Never operate machine without the guard
case and panel cover in Figures 16 and 17
in place. Ignoring this caution creates a
potentially hazardous situation in which
clothing, hair, hands or other body parts
may be pulled into the moving belt(s), caus-
ing moderate to severe personal injury.