Grizzly G1019 - Manual (Page 15)

G1019 14'' Bandsaw -13-
Figure 13. Connecting switch to motor.
The switch is pre-mounted on the bandsaw unit.
To lock-out the switch, you must unplug the safe-
ty key from the top of the paddle as shown in
Figure 12. Never subsitute unplugging the
machine from the power source with removing the
lock-out key from the switch.
Switch
Figure 12. Removing lock-out key from switch.
To connect the switch power to the motor, plug
the male end into the female end as shown in
Figure 13.