Grizzly G1019 - Manual (Page 19)

G1019 14'' Bandsaw -17-
Fence
To mount the fence to the bandsaw table:
1. Loosen the two mounting brackets secured
to the square fence rail and swing the
brackets so they are perpendicular to the
fence rail.
2. Position the mounting brackets under the
front of the bandsaw table and attach with
the two socket head cap screws provided.
See Figure 21.
Figure 21. Fence rail bracket attachment.
Dust Port
The dust port mounts underneath the table on the
lower wheel cover. To install the dust port:
1. Fit the dust port over the two holes on the
lower wheel cover.
2. Use the two 1 ⁄
4
"-20 x 1 ⁄
2
" hex bolts and 1 ⁄
4
"
washers to secure the dust port to the
cover. See Figure 20.
Figure 20. Dust port in place.