Genie TMZ-34 - Manual (Page 8)

6 Genie TMZ-34/19 Part No. 97866
Operator's Manual Fourth Edition • First Printing
SAFETY RULES
Personnel Lifting Configuration
Tip-over Hazards
Do not use the platform as a crane.
Do not place loads outside the platform perimeter.
Do not place or attach overhanging loads to any
part of the platform.
Do not push off or pull
toward any object
outside of the platform.
Maximum allowable
side force -
90 lbs / 400 N
Do not use the platform controls to free a platform
that is caught, snagged or otherwise prevented
from normal motion by an adjacent structure. All
personnel must be removed from the platform
before attempting to free the platform using the
ground controls.
Fall Hazards
Occupants must wear a
safety belt or harness and
comply with applicable
governmental regulations.
Attach the lanyard to the
anchor provided in the
platform.
Lower the platform entry mid-rail or close the entry
gate before operating.
Do not sit, stand or climb on the platform guard
rails. Maintain a firm footing on the platform floor at
all times.
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
Collision Hazard
Be aware of crushing hazards when grasping the
platform guard rail.
Material Lifting Configuration
Collision Hazards
Do not raise the load unless the material lifting
hook is properly secured to the machine.
Do not raise unless the load is properly balanced
and secured to the machine.
Do not stand under or allow personnel under the
load or the machine when the load is raised.
Crushing Hazard
Use common sense and planning when operating
the machine with the platform controls from the
ground. Maintain safe distances between the
operator, the machine and fixed objects.