beautypg.com

Manual lowering, Manual turntable rotation, Fall protection – Genie TMZ-34 User Manual

Page 29: Transport

background image

Part No. 97866

Genie TMZ-34/19

27

Operator's Manual

Fourth Edition • First Printing

Manual Lowering

1 Open the power unit side turntable cover and

locate the manual override valve.

2 Push and turn the brass

knob clockwise to open
the valve. The
individual boom manual
lowering valves will not
function until this valve
is open.

3 Locate the manual lowering valve at the base of

the secondary boom cylinder and push the
override knob until the secondary boom is fully
lowered.

4 Locate the manual lowering valve at the base of

the primary boom cylinder and push the override
knob until the primary boom is fully lowered.

5 Locate the manual

lowering valve at the
base of the jib boom
cylinder and push the
override knob until the jib
boom is fully lowered.

6 To operate the machine,

push and turn
counterclockwise to
close the override valve.

Manual Turntable Rotation

1 Open the power unit side turntable cover.

2 Turn the override knob on

the manifold in the
counterclockwise direction.

3 Push the turntable in the

desired direction.

4 Turn the override knob on

the manifold in the
clockwise direction to operate the machine.

OPERATING INSTRUCTIONS

Fall Protection

Personal fall protection equipment (PFPE) is
required when operating this machine.

All PFPE must comply with applicable
governmental regulations, and must be inspected
and used in accordance with the PFPE
manufacturer’s instructions.

Transport

1 Set the parking brake.

2 Secure the boom with the hold-down latches.

3 Attach the jib hold-down straps and latch

properly (if equipped).

4 Raise the tongue by turning the jack handle.

5 Position the ball of the transport vehicle directly

under the ball coupler.

6 Open the latch on the ball coupler.

7 Lower the tongue by turning the jack handle.

8 Close the latch on the ball coupler.

9 Attach the safety chains (if required) and the

brake safety cable to the vehicle.

10 Pull the jack release handle and rotate the

tongue jack to the stowed position.

11 Connect and test the trailer lights.

12 Release the parking brake.

This manual is related to the following products: