Grizzly Vertical Milling Machines G0728 - Manual (Page 4)

-2-
Models G0728–31 (Mfg. Since 11/11)
INTROduCTION
We stand behind our machines. if you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pa 17756
phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
if you have any comments regarding this manual,
please write to us at the address below:
grizzly industrial, inc.
C /
o
technical Documentation Manager
p.o. Box 2069
Bellingham, Wa 98227-2069
Email: [email protected]
Contact Info
Machine description
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings,
and photographs of the machine we used when
writing this manual. However, sometimes we still
make an occasional mistake.
Also, owing to our policy of continuous improve-
ment,
your machine may not exactly match the
manual. If you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine ID label (see below). This will help us
determine if the manual version you received
matches the manufacture date of your machine.
For your convenience, we post all available man-
uals and manual updates for free on our website
at
www.grizzly.com. Any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
Manufacture Date
of Your Machine
Manual Accuracy
the g0728/g0729/g0730/g0731 vertical Milling
machines are knee mills with 3-axis table move-
ment and 9 speeds designed for milling solid
materials. the turret and head pivot, increasing
versatility for cutting operations. these are great
mills for basic machine operations, such as slot
and keyway cutting, planing, and drilling.