Grizzly Vertical Milling Machines G0728 - Manual (Page 23)

Model G0728–31 (Mfg. Since 11/11)
-21-
SECTION 4: OpERATIONS
damage to your eyes or face could result
from using this machine without proper pro-
tective gear. Always wear safety glasses or a
face shield when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, we strongly recom-
mend that you read books, trade magazines,
or get formal training before beginning any
projects. Regardless of the content in this
section, Grizzly Industrial will not be held
liable for accidents caused by lack of train-
ing.
Operation Safety
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
basic Controls
this vertical mill is equipped with an on/oFF
spindle direction switch, as shown in
figure 17.
the mill can be turned on in the Forward (FWD)
direction, and turned on in the reverse (rEv)
direction. returning the switch to the vertical oFF
position turns the motor off.
OFF
REV FWD
figure 17. illustration of spindle direction switch