Grizzly Vertical Milling Machines G0728 - Manual (Page 32)

-30-
Models G0728–31 (Mfg. Since 11/11)
SECTION 5: ACCESSORIES
aCCEssoriEs
T10063—Milling Vise 12 5 ⁄
16
" x 6 9 ⁄
16
"
T10064—Milling Vise 17 1 ⁄
8
" x 8 3 ⁄
4
"
• ultra precise in flatness, parallelism and ver-
ticality.
• anti-lift mechanism ensures the workpiece
does not lift when jaws are tightened.
• Ductile iron body.
• Flame hardened vise bed and jaws.
• sealed bearing system.
• 8200 lbs. of clamping pressure.
figure 38. t10064 Milling vise (handle included,
but not shown.
G1075—52-pC. Clamping Kit
this clamping kit includes 24 studs, 6 step block
pairs, 6 t-nuts, 6 flange nuts, 4 coupling nuts, and
6 end hold-downs. the rack is slotted so it can be
mounted close to the machine for easy access.
Made for
1 ⁄
2
" t-slots.
figure 39. g1075 52-pC. Clamping Kit.
T20501—face Shield Crown protector 4"
T20502—face Shield Crown protector 7"
T20503—face Shield Window
T20452—"Kirova" Anti-Reflective S. Glasses
T20451—"Kirova" Clear Safety Glasses
H0736—Shop fox
® Safety Glasses
H7194—bifocal Safety Glasses 1.5
H7195—bifocal Safety Glasses 2.0
H7196—bifocal Safety Glasses 2.5
figure 40. Eye protection assortment.
T20451
H0736
T20452 T20502
T20503
H7194
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
order online at www.grizzly.com or call 1-800-523-4777