GE GFK-1852 - Manual (Page 26)

4-4 VersaMax Serial to Ethernet Adapter User's Manual – July 2000 GFK-1852
4
Configuration Parameters
After configuration mode is entered (confirm with ), the parameters can
be changed; default values can be confirmed with the ENTER key. The parameters
must be saved , and the VMSE performs a power reset.
The Configuration for each of the firmware loads of the VMSE is slightly different.
If you need to load a different firmware than is in the VMSE, load the firmware first,
and then follow the directions for configuration for the appropriate firmware. The
next sections contain the details for configuration setup for each of the firmware
loads.