Control unit rcu-014 – Furuno FAR-2827 User Manual

Page 19

Text mode
Original mode

1. MOUNTING

1-11

Fixing with KB fixing plate

1. Fix the KB fixing plate to the bottom of the control unit.
2. Attach cushions (three for RCU-014, two for RCU-015/016) to the bottom of the control

unit as shown below.

3. Fix it to a desired location with self-tapping screws (local supply).

Cushion

KB fixing plate

Side view for RCU-014/015/016

Fixing without KB fixing metal

1. Drill four mounting holes of 5 mm diameter referring to the outline drawing at the back of

this manual.

2. Fix the control unit with four screws (M4) from under side of the desktop. (The M4

screws with a sufficient length for the thickness of the desktop should be provided
locally.)

#70

308±1

398

136±1

180

4-M4 (Fixing holes)
(bottom)

Control Unit RCU-014

180

110±1

160

136±1

4-M4 (Fixing holes)
(REAR)

RCU-015/016