beautypg.com

FUJITSU MAS3367 User Manual

Page 283

background image

Index

C141-E167

IN-7

object and third party release
function 3-41

RELEASE EXTENDED 3-42
removable medium 4-17
report check 4-30
REPORT DEVICE IDENTIFIER 3-62
report log exception condition 4-29
REPORT LUNS 3-60
REQUEST SENSE 1-17, 3-42

command 1-21

reselection retry 3-17
reselection timeout delay 3-18
RESERVATION CONFLICT status 1-8,

5-13

RESERVE 3-37
reserved by Fujitsu 4-37
reserved operation code 1-24
RESERVE EXTENDED 3-40
reserve right and third party reserve function

3-38, 3-39

reset processing 1-27

during write 1-28

response and release condition

at sense data hold state 1-22
at UNIT ATTENTOION condition
hold state 1-20

response data

configuration 3-99
format field 3-5

response to link specification command

1-10

REZERO UNIT 3-35
RFJ 4-37
RLEC 4-29
RMB 4-17

bit 3-5

rotational position locking 4-19
rotational speed 4-19
rotational synchronization offset 4-19
rounded parameter report 4-37
RPL 4-19
RPR 4-37
RSRTY 3-17
RTD 3-18

S

SCSI-2 mode 3-7
SCSI-3 mode 3-6
SDTR 3-17

sector count/track 4-15
sector slip processing 6-2
SEEK 3-71
seek error 5-22
SEEK EXTENDED 3-71
self-diagnosis test 3-92
self-diagnostic error 1-29
self-test result

page 4-56
parameter data 4-56

SEND DIAGNOSTIC 3-92

command 3-95
parameter 3-96

sense and subsense code 5-6 to 5-10
sense code 5-4
sense command 3-1
sense data 5-1

additional information 5-10
analysis and error recovery method
5-14
basic information 5-2
error classification 5-14 to 5-17
error recovery method 5-1
format 5-1
hold condition 1-22
hold state 1-22
in not ready state 1-25
length 3-32

sense key 5-3, 5-5

inherent information 5-4
specific valid 5-4

SET DEVICE IDENTIFIER 3-63
SET LIMITS 3-72

command 3-73

setting parameter by MODE SELECT

command 6-6

single command 1-8
SIZE 4-24
size enable 4-24
SKSV 5-4
SMART data page 4-57
SMART status page 4-57
soft sectoring 4-16
soft write protect 4-30
spare sector area 6-2
spare sector within cylinder 6-2
specified cycle count over device lifetime

4-54

specifying initialization method 3-76
specifying range where access is permitted

3-73

This manual is related to the following products: