FUJITSU MAS3367 - Manual (Page 282)

Index
IN-6 C141-E167
parameter specification 3-94
parameter specifying
sector format 4-16
track format 4-15
PER 4-4, 4-20
Perf 4-34
persistent reservation type 3-54
code 3-55
PERSISTENT RESERVE IN 3-49
parameter data for READ KEYS
3-51
parameter data for READ
RESERVATIONS 3-52
PERSISTENT RESERVE OUT 3-56
command service action code
3-58
parameter list 3-58
service action 3-57
service action and valid parameter
3-60
phase CRC 3-17
PHSCRC 3-17
physiucal sector address format 3-81
P list 3-76, 6-1
bit 3-89
post error 4-4, 4-20
pre-fetch inhibit block count 4-25
persistent reservation scope 3-53
PERSISTENT RESERVE IN
service action 3-50
primary defect list 3-76
primary list 3-89
product ID field 3-7
product revision field 3-7
PS bit 3-33
Q
QAS bit 3-8
QErr 4-29
qualifier 3-9
field 3-5
queue algorithm qualifier 4-29
queue error management 4-29
QUEUE FULL status 1-8
quick arbitrate supported 3-8
R
RAC 4-30
RAERP, UAAERP, EAERP, READY ARE
HOLDOFF PERIOD 4-30
RC 4-3
RCD 4-23
READ 3-65
READ BUFFER 3-107
command 3-108, 3-109, 3-110
read cache disable 4-23
READ CAPACITY 3-13
data 3-14
read continuous 4-3
READ DEFECT DATA 3-88
command 3-89
read error
count page 4-43
in uncorrectable data 5-22
read errors recovered
without delay 4-44
with possible delay 4-44
READ EXTENDED 3-66
reading and verification of data 6-7
READ KEYS 3-50
READ LONG 3-111
read operation 2-2
READ RESERVATIONS 3-51
read/write error recovery parameter 4-1,
4-2, 5-25, 6-6
REASSIGN BLOCK command 3-86
REASSIGN BLOCKS 3-85
RECEIVE DIAGNOSTIC RESULTS
3-98
command 3-99
response data 3-100
reconnection processing procedure 1-14
reconnect processing 1-11
recovery procedure for disk drive error
1-27
recovery processing for error SCSI bus
1-26
recovery time limit 4-6, 4-21
reference temperature 4-52
re-initialization 6-5
RELEASE 3-37
Release
condition 1-20
function 3-41