FujiFilm A470 - Manual (Page 8)

14 15
Getting
Ready
1
TURNING ON AND OFF
Move to Photography mode or Playback mode
Press the “w” button during shooting to change to
Playback mode.
Press the “w ” button again to return to
Photography mode.
Photography b a Playback
Press the “w” button for about 1 second to turn the
camera on in Playback mode.
Turn the camera on in Playback mode
Power-ON
1
DATE/TIME NOT SET DATE/TIME NOT SET
SET SET NO NO
When using the camera for the first time after
purchasing, the date and time are cleared. Press
the “MENU/OK” button to set the date and time.
● ! The message appears when the camera has been left for a
long period.
● ! To set the date and time later, press the “DISP/BACK” button.
● ! If you do not set the date and time, this message will appear
each time you turn the camera on.
● ! Press the shutter button or turn the Mode switch to return to
Photography mode.
SETTING THE DATE AND TIME
Press the “POWER” button down fully to turn the
camera on.
Press the “POWER” button again to turn the
camera off.
The lens moves when the camera is in
Photography mode. Take care not to obstruct the
lens. Obstructing the lens will cause damage.
When this occurs, [FOCUS ERROR] or [ZOOM
ERROR] appears. Take care also not to get
fingerprints on the camera lens as this will result in
impaired image quality in your shots.
Turn the camera on in Photography mode
SET SET CANCEL CANCEL
2008
2007
2005
2004
YY.MM.DD YY.MM.DD
2006 0 0 2 1 : 1 1 .
AM AM
DATE/TIME DATE/TIME
2 1 Press “d” or “c” to select Year, Month, Day,
Hour or Minute.
2 Press “a” or “b” to correct the setting.
● ! Holding down “a” or “b” changes the numbers continuously.
● ! When the time displayed passes “12”, the AM/PM setting
changes.
0 1 0 2
3 Once you have set the date and time, press the
“MENU/OK” button. Pressing the “MENU/OK”
button changes the camera to Photography or
Playback mode.
● ! At the time of purchase and after leaving the camera for a
long period, settings such as the date and time are cleared.
Once the AC power adapter has been connected or the fully
charged battery has been installed for 10 hours or more, the
camera settings will be retained for roughly 24 hours even if
both sources of power are removed.
✽ Correcting the date and time (➡P.16)
◆ Auto power off function ◆
When the Auto power off function is active, if the camera is left unused for 2 or 5 minutes, this function
turns the camera off (
➡P.79). To turn the camera back on, press the “POWER” button. To play back
images, hold down the “ w ” button for about 1 second.
SET SET CANCEL CANCEL
YY.MM.DD YY.MM.DD 00 24 . 2 6 0 1 . 0 0 2
02
01
59
58
AM AM
DATE/TIME DATE/TIME