FujiFilm A470 - Manual (Page 46)

91
Viewing
Images
6
90
● ! Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
Printer starts printing the specified number of
prints.
1 Check that “PRINTING” is not displayed on the
camera’s LCD monitor.
2 Turn the camera off. Unplug the USB cable
(included).
USB socket USB socket USB socket
● ! “PRINT WITH DATE” is not available when the camera is
connected to a printer that does not support date printing.
4 1 Press “a” or “b” to select “PRINT WITH DATE”
or “PRINT WITHOUT DATE”. If “PRINT WITH
DATE” is selected, the date is imprinted on your
prints.
2 Press “c”.
PRINT WITH DATE PRINT WITH DATE
PRINT WITHOUT DATE PRINT WITHOUT DATE
PRINT DPOF PRINT DPOF
OK OK
PICTBRIDGE PICTBRIDGE
0 1 0 2
● ! Movies cannot be printed.
● ! Images photographed with a camera other than FinePix F470
may not be printed.
5 1 Press “d” or “c” to display the frame (file) for
which you want to specify PRINT settings.
2 Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and 2.
3 Always press the “MENU/OK” button after the
settings are completed.
YES YES CANCEL CANCEL
TOTAL TOTAL : 00009 00009
SHEETS SHEETS
FRAME FRAME
01 01
0 1 0 3 0 2
7
PRINTING PRINTING
SHEETS SHEETS
CANCEL CANCEL
1/9 1/9
Disconnecting the printer
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
— PictBridge FUNCTION
6.2.2 Specifying images for printing without using DPOF (single-frame printing)
1 Press the “w” button for about 1 second to turn
the camera on in Playback mode.
2 Select “®” PICTBRIDGE in “ò” USB MODE
in the “˜” SET-UP menu ( ➡P.76).
3 Press the “POWER” button to turn the camera
off.
● ! Do not connect to a PC when the “ ò ” USB MODE setting is
set to “ ® ” PICTBRIDGE. See P.107 if you connect to a PC
by mistake.
1
3 Press the “w” button for about 1 second to turn the
camera on in Playback mode.
“CHECKING USB” appears and then the menu is
displayed on the LCD monitor.
● ! If the menu does not appear, check whether the “ ò ” USB
MODE setting is “ ® ” PICTBRIDGE .
● ! Depending on the printer, some functions are disabled.
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
PICTBRIDGE PICTBRIDGE
ENGLISH ENGLISH
OK OK
NTSC NTSC
:
:
:
:
1
3
2
0 1
0 2
0 3
● ! The camera cannot be used to specify printer settings such
as the paper size and print quality.
● ! Please connect the AC Power Adapter AC-5VX (sold
separately) to your camera.
● ! Use internal memory or an xD-Picture Card that was
formatted on FinePix F470.
AC-5VX
(sold separately)
USB socket USB socket USB socket
2 1 Connect the camera to the printer using the USB
cable (included).
2 Turn the printer on.
6 “PRINT OK?” appears on the LCD monitor.
Press the “MENU/OK” button to begin printing.
PRINT OK? PRINT OK?
SHEETS SHEETS TOTAL TOTAL : 9 9
YES YES CANCEL CANCEL