FujiFilm A470 - Manual (Page 22)

43
Advanced
Features
3
42
AUTO AUTO
400
200 200
100
64
N :
:
:
AUTO AUTO
STD STD
1 Set the Mode switch to Photography mode.
2 Press the “p” button to display the menu on the
LCD monitor.
1 Press “a” or “b” to select “û” (sensitivity).
2 Press “c”.
● ! In “ r ” Movie mode, do not set the “ û ” (sensitivity) setting.
3
4
ISO ISO 200
N 10
When the sensitivity is set to “64”, “100”, “200” or
“400”, the selected sensitivity setting appears on
the LCD monitor.
0 1 0 2
Sensitivity is retained even when the camera is off
or the mode setting is changed.
û SENSITIVITY p PHOTO MODE PHOTOGRAPHY
1 Press “a” or “b” to change the setting.
2 Press the “MENU/OK” button to confirm the
setting.
h Settings
AUTO /64/100/200/400
● ! Although higher sensitivity settings will allow you to take
pictures in darker locations, they will also increase the
amount of speckling in your images. Streaking may also be
visible in shots of scenes such as the night sky.
Choose the sensitivity setting that best suits the conditions.
When selecting AUTO as the sensitivity setting, the
camera selects the best sensitivity setting for the
subject’s brightness.
1
2
0 1 0 2
N
200 200
100 100
400 400
64 64
AUTO AUTO
STD STD
ISO ISO
:
: 200 200
:
0 1 0 2
◆
Area shot and quality setting
◆
Normal shooting provides an
aspect ratio of 4:3 and “
„ ”
shooting provides an aspect ratio
of 3:2 (same aspect ratio as 35 mm
film and post card).
Area shot with “ „”
10 10 NN 12 12
Area shot excluding “ „”
„ (2816 × 1880)
Printing at up to 4R (10.2 × 15.2 cm) / A6 size 2 (1600 × 1200)
To use for e-mail or web site ` (640 × 480)
Printing at up to 6R (15.2 × 20.3 cm) / A5 size 3 (2048 × 1536)
Quality mode
5 N (2816 × 2112) Printing at up to 10R (25.4 × 30.5 cm) / A4 size
For better quality, select “ 5 F”
5 F (2816 × 2112)
Sample uses
Quality settings in Photography mode
˘ QUALITY MODE (NUMBER OF RECORDED PIXELS)
p PHOTO MODE PHOTOGRAPHY
Choose from 6 settings. Using the table below as a guide, select the setting that best suits your
aims.